E21 – Sewing Tips and Tricks

Uploaded by admin on March 16, 2013 at 10:18 am

Thanks! Share it with your friends!

Close

This tutorial will show you how to rethread your sewing machine, a trick to save time while you sew, changing the stitch length with ease, and much more.

Comments

JohnDelannoy says:
September 12, 2012 at 5:19 am

I’m so glad you’re back!?

crxtech1 says:
September 13, 2012 at 11:58 pm

HI :D I have a sleeve on a jacket that I am trying to extend at the end. I have the tube of material that I want to sew at the end of the sleeve for the extension but they both won’t fit around the end of my sewing machine so I cant stitch them together. How do i stitch them together? they are a stiff material too (trench coat) so its hard to fold it? up to sew it from the inside

PandemicApparel says:
September 15, 2012 at 1:01 am

Not sure what “the tube of material” is … but you’ll want to sew it from the inside of the sleeve/cuff. In other words the inside of the circle rather? than outside, if that makes any sense. If you need to top stitch, turn it out-side-in then sew. Let me know if this helped you at all.

crxtech1 says:
September 15, 2012 at 1:06 am

HI :D OK so I couldn’t sleep last night and was thinking how to do it… I managed to scrunch it up around the needle foot? thing so I can stitch it from the inside. It was hard to see and one side got crooked so I had to do it twice. I couldn’t get the material to slide properly to do one stitch all the way around so I had to stop like 4 times to turn it and make about 4 stitches to connect them together.

crxtech1 says:
September 15, 2012 at 1:10 am

Anyway it’s my 1st time stitching anything.? I got the machine from walmart a brother, it was $88 it took like 3 hours to figure out that I need to bring up the bottom thread from the bobbin! LOL I kept trying to sew and it was just bunching up in the bottom until I watched one video showing I have turn the needle down and bring up the bottom thread…I didn’t know that :D

PandemicApparel says:
September 15, 2012 at 3:06 am

Welcome to sewing … you might like some of my new tutorials. I’ll be showing how to sew? from start to finish using a straight stitch on light to medium weight woven fabric.

girltuttie says:
October 21, 2012 at 5:50 am

Omg my tension i guess…my bobbin thread isnt flat. It pokes up meaning its loose..how? to tighten..juki also

MsAlicia03 says:
February 5, 2013 at 9:41 am

Hi,how much is tis industrial machine?
Home sewing is this machine Recomnened ?
Is this machine have straight and zig zag stitch?pls reply? ASAP tks.

Comments are disabled for this post.

Powered by Yahoo! Answers